Be-Friend Technology
new open                                                                                
Emulator,Development System
Development Kit
Programmer,Interface Protection
Basic Equipment
IC Components
USB SIMLAB 8051 Development Kit
1.ISP online burning programs can burn through a USB port to program MCS51 the 8K Flash ROM, up to the maximum burning program...
ARM JTAG 嵌入式模擬器
ARM JTAG嵌入式系統模擬器
Development Kit > CME-566 Development Board 發展系統
  CME-566 Development Board 發展系統

The CME-566 (MPC566EVB) provides Ethernet connectivity with the powerful features of the
 Motorola MPC565/566. The system is Plug and Play with the supplied Axiom and MBUG
Monitors in the on-board Flash EPROM. Board features 1MByte (256K x 32) Synchronous SRAM,
2MByte (512K x 32) Burst Flash EEPROM, 10/100TX Ethernet Port, MPC566 Communication Interfaces,
Keypad and LCD Module support. Development kit contains Serial Cable, Ethernet Cable, Wall
Plug power source, printed hardware manual and the MPC5xx support CD with programming utilities,
support and sample software, and technical manuals. The MBUG Monitor provides 10/100TX Host
interface for development use. Software development tool suites that support background debug
emulation (BDM) or Nexus are recommended to develop applications for the MPC566 microcontroller.

Standard Features:

Global Wall-Plug Power Supply (CE certified)
Processor Mounted on Board (No socket)
AMD AM29BDD160 type synchronous flash.
Serial Cable, 6'
Ethernet Cable, 6'
MPC5xx Support CD with device manuals, example software, utility and hosting software.
Hardware Manual
3rd party Demo CD's of C compilers and tool suites.

MPC566EVB Features:

Standard fixed memory (buffered):
256K x 32 Sync. SRAM (100MHz)
512K x 32 Burst Flash EEPROM
Power Oak (MC33394) Power supply w/ CAN_A transceiver
10/100TX Ethernet Port - LAN91C111 MAC+PHY based, memory mapped.
MAP Switch - provides easy selection of memory map and devices.
CONFIG Switch - provides basic Hard Reset Word Configuration options, all others provided by jumper.
BDM Development Port, 10 pin standard with 2.6V I/O.
NEXUS Development Port, 50 Pin standard.
COM1 - SCIA1 w/ RS232 type DB9-S Connection
COM2 - SCIA2 w/ RS232 type DB9-S Connection, DTE/DCE option
COM3, 4 - SCIB1 and 2, w/ RS232, 10 Pin headers for IDC ribbon connect to DB9 serial.
CAN Ports - 3 CAN ports, 1 x 4 headers. CAN_B and C = PCA82C250 interface.
LCD Port - LCD Module Interface Connector w/ Contrast Adjust, Buffered and Memory Mapped
KEYPAD Port - 16 Key interface, applies QADC_B PQA4-7 and PQB4-7.
BUS Port - provides 32 data and 24 address or MPC565 ports A and D on 60 pin header.
CONTROL Port - Bus Controls for MPC565 ports on a 40 pin header.
QSM Ports - 2 Serial I/O ports with 16 pin socket headers.
MIOS Port - MDA, PWM, and MGP timer or I/O interface with 34 pin socket header.
TPU Ports - 3 Timing Processor I/O ports with 20 pin socket headers.
QADC Ports - 2 Analog I/O ports, one 20 pin and one 24 pin socket header.
IRQ Port - Interrupt or MPC565 SGP port I/O with 10 pin header.
POWER Port - Primary and standby power supply access port, Power Oak options.
Breadboard Prototyping area (2.5 x 1.5 inch) for easy installation of test connections.
Power Indicators - Supply voltage indications for 5, 3.3, and 2.6V supplies
Reset Switches - POR, Hard, Soft reset buttons.
User Components - 4 indicators, 4 push switches, and a Potentiometer.
CE certified class A as shipped with universal power supply.
I/O Connectors in .1 grid Socket headers provide easy wire connection to breadboard prototype area
or with pin headers installed, will allow ribbon cable or wire wrap connections.
Mictor Logic Probe connector locations (connectors not provided) for Bus and Control signals.
Large Prototyping Area (4 x 1.75 inch) with +5V and ground connection grids.

Power Supply
3 to 25VDC Input, 300ma typical @ 9VDC.
5.0V @ 1A output with 3.3V, and 2.6V regulated supplies.
Board Size - 7 x 7.6 inch.


AboutBest ChoiceNew ProductsNewsQ & AContact UsCourseDownload
Copyright All rights reserved. © Be-Friend Technology Inc. TEL:886-4-26528352 FAX:886-4-26523150
ADDRESS:43449 1F., No.8, Ln. 133, Yuandong St., Longjing Dist., Taichung City 434, Taiwan (R.O.C.)

My status