Be-Friend Technology
new open                                                                                
Emulator,Development System
Development Kit
Programmer,Interface Protection
Basic Equipment
IC Components
FPGA+ARM+8051 Development Kit
ALTERA CYCLONE Ⅲ EP3C10 ARM (NXP) Embedded Systems Internship (optional) 8051 single-chip microcomputer buzzer functi...
CT-6C Digital IC Tester

Development Kit > CME-555 Single Board Computer 發展系統
  CME-555 Single Board Computer 發展系統

The CME0555 is a development system for the Motorola MPC555 PowerPC Microcontroller. The
system is Plug and Play with the supplied Axiom Monitor provided in on-board PROM, 128K x 32
(512K bytes) Fast SRAM, 128K x 32 (512K bytes) minimum external Flash EPROM, Serial Cable,
9v 500ma Wall Plug, printed hardware manual and the MPC5xx support CD with programming
utilities, support software, source codes and technical manuals. Compatible with all MPC555 C
compilers and tool suites for application development.


MPC555 Controller
Standard fixed memory:
128K x 32 Fast SRAM
128K x 32 Flash EPROM minimum
Two Configurable 32pin memory sockets for
32K to 2MByte PROM and 32K to 512KByte SRAM
32 Bit Bus support with 8 bit memory bank control
COM1 - SCI1 w/ RS232 type DB9-S Connection
COM2 - SCI2 w/ RS232 type DB9-P Connection
2 TouCAN Ports w/ 1M baud transceivers
LCD Interface Connectors w/ Contrast Adjust,
Memory Mapped (80 or 160 character)
Keypad Interface Connectors, 16 or 20 Key
60 pin BUS_PORT w/ 32 data and 24 address
34 pin CONTROL_PORT w/ Bus Control signals
14 pin QSM_PORT serial port I/O
34 pin MIOS_PORT with PWM and parallel I/O
34 pin TPU_PORT with Timer Module I/O
34 pin QADC_PORT with Analog I/O
10 pin INT_PORT with Interrupt I/O
Power_Port w/ Power supply access
Background Debug Mode (BDM) connector
All I/O connectors in .1 grid to maximize use
Large Prototyping Area w/ solderless breadboard
6 to 25VDC Input to 5V @ 2A Switching Supply
and 3.3V @1.5A Power Supply
Typical Operating Power: 400ma @ 40MHz
User Indicators, Pot, and Switches for easy application development
Easy configuration with Mode Switches and Option Jumpers

The Axiom development system provides for low cost software testing with the use of the Monitor
in the on-board EPROM. Operations allow the user to load code in the On-Board RAM, Execute
application, and display or modify registers or memory. After code is operational the user may
relocate the code and reprogram the MPC555 Internal Flash EEprom or the boards fixed flash
for dedicated operation of new software. No additional hardware or software is required to operate.
For high level debug, extensive tools are available for the PowerPC core and the Debug Port is
available to connect a background debugger.


AboutBest ChoiceNew ProductsNewsQ & AContact UsCourseDownload
Copyright All rights reserved. © Be-Friend Technology Inc. TEL:886-4-26528352 FAX:886-4-26523150
ADDRESS:43449 1F., No.8, Ln. 133, Yuandong St., Longjing Dist., Taichung City 434, Taiwan (R.O.C.)

My status